ECOSPEED F HT 2
5-axis machining center
This high-speed machining center is perfect for rapid cutting of small and mediumsized workpieces with maximum productivity. The critical innovation is the Sprint Z3 parallel kinematic machining head, which enables components to be produced with excellent dynamics and precision and an outstanding surface quality, at batch sizes of a single unit through to bulk production. The excellent machining and surface quality means that there is no need for the manual rework that is usually required with conventional machining centers. This results in increased efficiency, improved process reliability and long-term stability. The key features include 39.4 x 39.4 inch pallet size, up to 160.92 hp spindle power and rapid tool change, from either a chain or rack magazine.
The table with the work piece moves horizontally in the X-axis while the headstock traverses on the stationary column to provide Y-axis movement. Z-axis, A-axis and B-axis movement is provided by the Sprint Z3 head with an additional positioning axis provided by the rotary table.
Key benefits:
– Unique drive concept (Sprint Z3)
– High drive power (maximum 160.92 hp)
– Full 5-axis machining
– Excellent acceleration in all axes
– Outstanding surface quality
– Minimum down times
– Maximum process reliability
– Rapid tool changeover (from chain or rack magazine)
– Optimum precision
Axis Configuration
Technical Data
Please choose the Measuring Unit
| Length (X-axis) | mm | 1,000 |
| Width (Y-axis) | mm | 1,000 |
| Payload | kg | 3,000 |
| X-axis | mm | 1,600 |
| Y-axis | mm | 1,600 |
| Z-axis (spindle horizontal pos.) | mm | 670 |
| Z-axis (spindle +/- 45°) | mm | 370 |
| A/B-axis, conical work envelope | ° | +/- 45 |
| Bt-axis (table) | ° | 360 continuous |
| Pallet changing time (definend cycle) | sec | 35 |
| Chip to chip time (definend cycle) | sec | 10 / 13 |
| Acceleration / deceleration in X-axis | m/s2 | 7 |
| Acceleration / deceleration in Y-axis | m/s2 | 9.81 |
| Acceleration / deceleration in Z-axis | m/s2 | 9.81 |
| Acceleration / deceleration in A- and B-axis | °/s2 | 685 |
| Rapid traverse / feed in X-axis | m/min | max. 50 |
| Rapid traverse / feed in Y-axis | m/min | max. 50 |
| Rapid traverse / feed in Z-axis | m/min | max. 50 |
| Rapid traverse / feed in Bt-axis | rpm | 20 |
| Tool magazine | chain type 40 / 60 / 80 pockets; WERO rack type 129 pockets |
| C-axis | ° | 360 continuous |
| Right angular drilling head (spindle 90° +/- 45°) |
